Kaduna Polytechnic
Kaduna Polytechnic has grown from a humble beginning in 1956 when it started as “Kaduna Technical Institute” to what is today the largest Polytechnic in Africa South of the Sahara in terms of staff, student population and physical infrastructure.
It is the second oldest technological institution in Nigeria, the oldest being Yaba College of Technology which was established in 1948. Kaduna Polytechnic is also the second largest tertiary institution in Nigeria after Ahmadu Bello University, Zaria.
that suggested the upgrading of Yaba College of Technology to an institute and proposed the establishment of technical institutes in Kaduna and Enugu. In 1956, the Kaduna Technical Institute took off with the following mandate:
(a) To operate in fields other than those of the Nigerian College of Arts, Science and Technology.
(b) To train engineering assistants (technicians)
(c) To provide “feeders” for the Nigerian College of Arts, Science and Technology as much as possible but not exclusively.
(d) To provide courses leading to a standard of the Ordinary National Diploma Certificate in the United Kingdom.
It was envisaged that the courses raised to the standards equivalent to Higher National Certificate and Diploma. Candidates admitted to Junior Technical Courses were those that successfully completed their primary education. The Junior Technical Programme (comparable to the Secondary Technical Schools in England) was to run for four years after which students were to be awarded the National Certificate in Mechanical Engineering, Electrical Engineering, Civil Engineering, Building Engineering or Commerce. Provisions were also made for students to prepare for the City and Guilds Examination in several technical subjects. These were in Electrical Installation, Telecommunication subjects, Sheet and Metal Working, Carpentry, Wood Machinist, Brick Workmanship, Painting and Decorating, Structural Engineering, Painting Trade, Handicraft Teacher Training and General Craft Instruction in wood, Metal, Pottery, Weaving, Leather Works and Bookbinding.
The Commercial Department of the Kaduna Technical Institute opened in 1956 with the objective of teaching commercial subjects to meet the shortage of trained clerical staff. The Junior Commercial courses ran for two years in residence and successful candidates were awarded Junior Certificate. The Senior Commercial courses ran for one year with the students selected from the junior course. The successful candidates were awarded the Senior Certificate. Subjects taught in both courses were English Language, Book Keeping, shorthand, Typewriting, Commerce, History, Economics and Elements of Mercantile Law.
By 1959/60, evening courses were held twice weekly (Mondays and Thursdays) for beginning students who were in clerical employment and had been educated in Middle II standard or had a certificate in English Language of the Royal Society of Arts or its equivalent. Elementary courses were offered for students who had completed a course in the Theory of Pitman’s Shorthand while intermediate courses were offered for students who had certificate in Shorthand at the speed of not less than 70 w.p.m.
The Northern Nigeria Executive Council at its meeting of 17th August, 1962, redesignated the Kaduna technical Institute as ‘the Polytechnic Kaduna’. It became ‘Kaduna Polytechnic’ in 1968 under the Federal Government Decree No. 20 of 1968 which was amended in 1979 by Decree No.73. On 27th August, 1991, the Federal Government took over the institution under Decree No. 40 of the same year.
The institution was established with the objective of providing diverse instructions, training and research in technology, the sciences, commerce, the humanities and in-service programmes for members of the public service in Nigeria. In 1968, it amalgamated two formerly independent training centres namely: the College of Science and Technology (formerly Kaduna Technical Institute) and the College of Administrative and Business Studies (formerly Staff Development Centre). The College of Environmental Studies (formerly Survey Unit) was intergrated in April 1970 to complete the three collegiate structure of the polytechnic which operated within 1990.
A new college, the College of Engineering was in 1990 created out of the College of Science and Technology to form the four units of the collegiate structure of the Kaduna Polytechnic.
The polytechnic is highly cosmopolitan with students admitted from all over Nigeria and other countries. It has been in the forefront in the training of high and middle level manpower for the various sectors of the economy.
From a modest figure of 158 students in 1961 at the Technical Institute, student enrolment increased to 894 by 1968 and a total of 594 students attending courses on part-time, while 300 were on full-time programmes. Currently, the polytechnic has over 20,000 students undertaking 173 programmes spread over the 30 academic departments of the four colleges. The courses vary in duration and character, ranging from Certificate, Diploma, National Diploma, Higher Diploma, Higher National Diploma, Post-graduate Diploma to Post Higher National Diploma, as well as NCE (Technology) and B.Ed. (Technology) which is run in affiliation with the Federal University of Technology, Minna.
The uniqueness of the curricula covered under the various programmes is the emphasis on practicals to ensure that graduates acquire the right skills required by government, industry and commerce or self-employment.
Kaduna Polytechnic has mounted a number of Post-graduate programmes and Post-HND programmes in Urban and Regional Planning, Land Surveying and Building. In 1995, the polytechnic started the first ever National Board of Technical Education (NBTE) approved Post-HND programme in Electronics and Communication Engineering.
Contact Details:
Central Administration , Tudun Wada
P.M.B. 2021, Kaduna
TELLEPHONE: 062 – 419503 or 414493
PABX: 062 – 414493
FAX: 062 – 416055
E-MAIL: ca@kadpoly.com
WEBSITE: www.kadpoly.com
College of Science and Technology
P.M.B. 2021, Kaduna
TELEPHONE: 062 – 419500
EMAIL: cst@kadpoly.com
College of Engineering
P.M.B. 2021, Kaduna
TELEPHONE: 062 – 419506
EMAIL: coe@kadpoly.com
College of Administrative and Business Studies
Golf Course Road
P.M.B. 2113, Kaduna
TELEPHONE: 062 – 247049
EMAIL: cabs@kadpoly.com
Bye-pass Campus (A sub unit of CABS) , Kachia Road
College of Administrative and Business Studies
P.M.B. 2113, Kaduna
byepass@kadpoly.com
College of Environmental Studies
P.M.B. 2026, Kadua South
(Next to Federal Ministry of Land and Survey)
ces@kadpoly.com
Isa Kaita Library
P.M.B. 2021, Kaduna
TELEPHONE: 062 – 410561
FAX: 062 – 414973
E-MAIL: ikl@kadpoly.com
Website: http://kadpoly.com
Plz I’m in Akwa Ibom, plz kindly send me info on KADPOLY 2010 admission. My mobile contact is 08074181506. Thank!
plz if u known a webs 2 apply 4 federalpolykad plz kidly txt me wit dis no 07063835772 n u ll ve a reward frm me tnx.
Pls may i know the date 4 post ume in kadpoly.pls txt me on 08135829727or flash i will call.Thanks